Tailoring carbon-modified 2.1LiH-1Mg(NH2)2-0.1KH composite for long-duration stationary hydrogen storage

Publication Type

Miscellaneous

Date Published

09/30/2026

Authors

DOI

Abstract

Traditional metrics for materials-based hydrogen storage frequently focus narrowly on gravimetric and volumetric hydrogen capacities, meaning that system constraints and economic costs are often ne-glected. Here, we combine experimental measurements, mesoscale simulations, and techno-economic analysis (TEA) to evaluate 2.1LiH-1Mg(NH2)2-0.1KH for a 10 MW, 96 h stationary backup power application, emphasizing effects of cycling degradation, thermal conductivity, reaction kinetics. Our results show rehydrogenation using a 99:1 H2/N2 mixture suppressed capacity degradation relative to pure H2, with the material retaining 73% of its initial capacity after 87 cycles. The measured degrada-tion was incorporated into TEA to quantify its effects on hydride oversizing, replacement frequency, system volume and levelized cost of storage. For the application considered, a cycle life of approxi-mately 360 cycles with no more than 25% capacity loss is required to reduce levelized cost of storage (LCOS) below that of 350 bar compressed hydrogen storage (approximately $0.40 kWh-1). With a 10% expanded natural graphite (ENG) addition, the effective thermal conductivity increases by rough-ly 60% as hydrogen pressure rises from 1 to 100 bar, and the desorption activation energy decreases from 187 to 135 kJ mol-1. Mesoscale simulations qualitatively reproduced the pressure-dependent conductivity and indicated contributions from graphite content and gas solid interfacial heat transfer. TEA translates these experimentally measured properties into system performance and identifies quan-titative material property targets for cost competitive, long duration stationary hydrogen storage.

Year of Publication

2026

URL

Notes

Pre-print

Organization

Research Areas